How to setup the Wyze Thermostat?

To set up your Wyze Thermostat: In the Wyze app, tap Home, then tap + plus sign on the top left. Tap Add Device. Tap Home > Wyze Thermostat. Tap Begin Preparation. Follow along in the app, and with the video below. ... Make sure your phone/tablet's Bluetooth is enabled. More items... Jun 13, 2023

How to set Wyze Thermostat schedule?

To create a schedule for Wyze Thermostat: In the Wyze app, tap on your Wyze Thermostat. Tap on the Settings gear on the top right. On the Settings screen, tap Schedule > Create schedule .

How do I reprogram my Wyze Thermostat?

Factory reset the thermostat and set it back up like new. Press and hold the control wheel for 10 seconds. The thermostat will display a question. Turn the wheel to select Yes then press the control wheel to reset. Walk through setting up the device like new in the Wyze app, including redoing the wiring. Mar 3, 2023

Can you set up a Wyze Thermostat without WiFi?

No, only to set up the thermostat . That said, to use the Wyze app or Alexa to control your Wyze Thermostat, you will need to be connected to WiFi.

Why is my Wyze Thermostat not turning on my furnace?

Check the wires at the control board, making sure that each wire is secure . Turn the power to the HVAC system back on. Then go through testing the system. Testing can be found under Settings > Advanced > System Test in the Wyze app.

How do I set my thermostat schedule?

Start by selecting a day of the week and inputting the time when you want the first period of the day to start and the temperature, or set point, you want during that period. Then set the next period and so on until that day is finished. (Some models allow you to copy the schedule from one day to the next.)

How do I reset my thermostat schedule?

Switch the thermostat to the off position. Locate the breaker that powers your HVAC system and turn it off. Wait 30 seconds and turn the breaker back on. Turn your thermostat back on and confirm it has reset properly.

How do I set my Wyze Thermostat to hold?

How do I hold a thermostat temperature and prevent a rule from changing it's status? Go into the T-Stat and at the bottom there is a slider called Controls. Tap on that, then at the bottom there is a hold button, tap on that and pick a time to hold for . If you want to hold until you cancel it, don't set a date or time.

What is the minimum temperature for Wyze Thermostat?

Summary: The lowest you can set the thermostat is 50F (10C) .

How do I check and reset my thermostat?

If your thermostat has a recessed reset button, press it with a paperclip for 5 seconds and then release . If you have a battery-operated thermostat and reset mode didn't help, try taking out the batteries for 5 seconds and then putting them back in.

Can you use Wyze Thermostat without C-wire?

Wyze Thermostat requires a C-wire, or "common" wire, for power . Don't have a C-wire? We've included a C-wire adapter in the box. Wyze Thermostat does not use batteries.

How do I get my Wyze Thermostat back online?

Power cycle the thermostat by turning the breaker off for about 30 seconds, and then turn it back on . Perform a factory reset, and then set it up again.

How do I set up a Wyze system?

Set up Wyze Home Monitoring. In the Wyze app, tap Monitoring. ... Set up your Wyze Sense Hub. You'll set up your Wyze Sense Hub in the following steps. ... Set up your keypad and sensors. ... Add your Contact Information. ... Set up your Alarm triggers. ... Set up your PIN. ... Set up your Entry/Exit Delay. ... Set up your security cameras. More items... Jun 6, 2023

Wyze WTHERM Smart Programmable Thermostat user manuals

Contents hide

1Wyze WTHERM Smart Programmable Thermostat

2In the Box

Wyze WTHERM Smart Programmable Thermostat

In the Box

Wall Cover x1
Back Panel x1
Thermostat x1
Screw and Anchor x2
Quick Start Guide x1
C-wire Adapter with Cables x1
Labels x1
Phillips Screwdriver x1
Flathead Screwdriver x1

Setup

Download the Wyze App and create an account.
On the home page, click New Device” to add our device.
Follow the App to complete the installation. App guided steps:
- Powering off your heating/ cooling system
- Removing your old thermostat
- Selecting wiring for the Wyze thermostat
- Securing the Back Panel to the wall
  Installing your new Wyze thermostat
- Connecting the Wyze thermostat to your network

Compatibility

Compatible with 24-volt systems such as forced air, hydronic, heat pump (including dual fuel), oil, gas and electric.
The Wyze Thermostat is compatible with most single-stage and multi-stage conventional and heat pump heating and cooling systems.
Not working with zoning panel (zoning controller).
Not compatible with modulating equipment (Redlink, Comfortmater, Climate Talk).

ElectricalRequirements	24VAC
Wires	No need for Common{C-wire)
Conventional(FurnaceandAir Conditioning)	Up to 2 stages heatUpto 2stagescool
HeatPumps	Upto4heatstagesUp to 2stagescool
Accessory (Humidifier, Dehumidifier, Emergency heat, Ventilator)	OneAccessorysupportavailable
Transformer (Boiler and AirConditioning)	Can support all comlinations of single and dualtransformers

Specifications

Model: WTHERM
Bluetooth: V4.2
INPUT: 24V- 60Hz 0.15A max
Connectivity: Wyze Sense
Compatibility: Android 5.0+, iOS 9.0+
Operation Temperature: 32-130° F (0-55°C)
Operation Humidity: 5%-95%RH (non-condensing)
Storage Temperature: -22-140″F (-30-60″C)
Storage Humidity: 5%-95%RH (non-condensing)

Warranty Information

Wyze warrants to the original owner of the Product that the Wyze Thermostat will be free from defects in materials and workmanship for a period of one (1) year from the date you purchased your Product from Wyze or an authorized retailer (the “Warranty Period”) Wyze will, at its sole option, either (a) repair or replace any defective Product or component or (b) accept the return of the Product and refund the money actually paid by the original purchaser for the Product to the payment method used by the purchaser. This warranty is not transferable and applies only to the original purchaser. Repairs or replacements may be made with new or refurbished products or components, at Wyze’s sole discretion. If the Product or a component incorporated in that Product is no longer available, Wyze may, at Wyze’s sole discretion, replace the Product with the available model nearest to the original model’s form, functionality, and performance.

Warning

Ensure power to your HVAC system is off at the breaker before adjusting any wires at your thermostat or control board.
Do not attempt to open or modify in anyway the Wyze thermostat or CWA contained within this package.
If installing the thermostat new, ensure the thermostat is placed in a location away of from direct sunlight at all times. Direct sunlight will effect temperature readings.
Bluetooth-associated logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Wyze Lab Inc. is permitted under license. Other trademarks and trade names are those of their respective owners.

FCC-ID Warning

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC RF EXPOSURE STATEMENT

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.This equipment should be installed and operated with minimum distance 20cm between the radiator& your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC/ISED Warning

ISEDC Requirements:
This device complies with Innovation, Science, and Economic Development Canad licence-exempt RSS standard(s). Operation is subject to the following two conditions:

this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired operation of the device.

The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure and compliance. The minimum distance from body to use the device is 20cm.

REFERENCE:

Download Manual:Wyze WTHERM Smart WI-FI Thermostat User Manual