Water for Wildlife: Bird Baths and Backyard Ponds (2022)

Although backyard feeders are a popular way to attract birds, providing a source of water is equally important for creating a wildlife friendly yard. By adding a bird bath or wildlife pond, you provide necessary water not only for birds but for many other species as well. You also add an aesthetically pleasing element to your backyard. This fact sheet covers the basics of selecting and maintaining a bird bath. It also tells how to create a backyard pond to attract birds, insects, amphibians, and other wildlife.

Bird Baths

Adding a bird bath to your yard is the easiest way to provide drinking and bathing water for birds. A bird bath does not need to be elaborate or expensive, and it can be made with materials found around the house. Bird baths require only a small amount of care and maintenance, and they will attract not only birds but other animals as well.


There are two basic types of bird baths: aboveground baths, which often hang or are placed on a pedestal, and baths placed at or near ground level. The type of bath you select will determine the kinds of birds you may see using it.

In general, birds that typically feed at bird feeders, such as the black-capped chickadee, house finch, and tufted titmouse, are most likely to use a bird bath located aboveground. Adding another bird bath on the ground may also attract less common backyard bird species, since this type of bath more closely mimics a natural stream or pond. Ground-level baths also provide water for many other animal species, such as chipmunks and squirrels. Having both types allows you to provide water for the greatest variety of wildlife species.

Bird baths come in a variety of sizes and materials, and they can be found at most garden, home, and pet stores. They range from about twenty dollars for a simple hanging terra-cotta or pedestal concrete bath to several hundred dollars for a cast iron or aluminum bath. You can make an inexpensive bird bath from materials found around the house, such as the inverted lid of a garbage can or a large terra-cotta plant saucer. Either place these directly on the ground or attach them to a rope or chains and hang from a tree branch.

Whether you buy or make a bird bath, keep in mind what is most attractive to a bird. Birds do not like slippery surfaces, and baths made out of materials such as glazed pottery or smooth plastics are not as attractive as those with a rough surface, like concrete or terra-cotta. If you already have a bird bath, or are making one, provide a nonstick surface by adding a few small rocks or even bathtub stickers. In addition, birds will only use a bath with shallow water, no more than two to three inches of water at the deepest.

Another way to attract birds to your yard is to add a dripping or misting water feature. A dripper adds water slowly to a bird bath from above, creating the sound of water dropping into the bath. You can purchase one from many of the same places that sell bird baths, but you can also make a simple version with a plastic soda bottle or milk jug. Simply fill the bottle with water and puncture a small hole through the bottom. Then attach the bottle above the bath water and allow it to drip in (it will need to be refilled daily).

A mister is another popular water feature. You can place it anywhere in your yard by attaching it to a garden hose. Many birds, especially hummingbirds, enjoy flying through the fine mist that is created. Misters are also commonly sold where bird baths are found.


Birds like to have a safe place to drink and bathe, so it is best to place your bird bath near shrubs or some low tree branches to allow them to escape quickly if aerial predators are nearby. In addition, a shady location will keep your bath from overheating in the summer and keep algae levels low. When you have a ground level bath, however, it is important to be aware of any cats that may be able to sneak up and attack the birds using your bath. If this is a potential problem in your yard, place your ground bath someplace where the birds can see a cat or other predator approaching, typically 10-15 feet from the nearest hiding spot. Finally, do not place your bird bath underneath bird feeders, since food and droppings will dirty the bath.

Care and Maintenance

Ideally, the water in your bird bath should be changed every day to prevent dirt and debris from accumulating. Changing the water daily in the summer also prevents mosquito larvae from hatching in your bird bath, which is a concern where the West Nile virus may be present. You should also scrub your bath with a brush, mild soap, and water every week to remove algae.


The winter months can be especially difficult for birds and other animals, since water can be scarce. Maintaining your bird bath throughout the winter will ensure a constant supply of fresh water. A variety of heated bird baths will keep the water in your bath above freezing during the winter; there are also submersible heaters that you can place directly into the bath water. Both types require a nearby electrical outlet. Solar heaters are also available for bird baths. These work well under sunny conditions but not when it is cloudy or overcast.

The Next Step: A Backyard Pond

If you decide that you want to add a larger water feature, attract a wider variety of wildlife, or add an aesthetically pleasing feature to your backyard, you may want to consider a wildlife pond. Backyard water gardens and ponds have become increasingly popular in the last few years, and the options can seem endless. Despite the large array of sizes, shapes, and designs, creating a simple pond can be cost effective and can attract a variety of wildlife. Remember, however, that a wildlife pond is not the same as the ornate water garden you may see advertised in garden stores or magazines. The most effective wildlife ponds blend into an informal yard or garden that has trees and shrubs designed to attract wildlife. If you do decide that a wildlife pond is right for you, you'll need to make some important decisions before you start digging.

Planning a Backyard Pond

One of the first questions to consider is what type of wildlife you want to attract. A backyard pond can range from a simple, shallow pool that attracts primarily birds to a larger, deeper pond with plants and waterfalls, or anything in between. Because there are so many options, it is important to consider the needs of the wildlife you are trying to attract. Listed below are some of the animals you may find at a wildlife pond, as well as some of their requirements in a pond.


Birds use even the smallest ponds for drinking and bathing, provided the water is not too deep. A larger pond can also provide for birds, as long as part of the pond has a shallow edge. Shallow rocks or sand along this area provide a non-slippery surface that birds prefer. A dripping feature or waterfall is also very attractive to birds.


Amphibians use a backyard pond and the surrounding vegetation for food, shelter, and breeding. In the wild, frogs and toads lay their eggs in temporary pools or the shallow waters of natural ponds, seeking areas where fish are absent and cannot eat their eggs. Unfortunately, fish and amphibians do not usually co-exist in a wildlife pond either, and the usual recommendation is to have a fishless pond if you want to attract amphibians.

(Video) A Complete Guide to Bird Baths with Mark Lane | PrimroseTV

Once tadpoles develop, they require shallow water so they can successfully emerge from the pond. Some amphibians, such as bullfrogs, also need areas of deeper water (up to three feet), where they overwinter underneath rocks and vegetation. All amphibians require areas of wet vegetation, rocks, and logs around the pond's edges to provide cover, shade, moisture, and food.


If you decide you want to add fish to your wildlife pond, it is best to include native species that you would find in a natural pond. Many smaller sunfish species or a minnow such as the golden shiner can be kept in a backyard pond. Although exotic fish like goldfish and Japanese koi are popular, they would be out of place in your wildlife pond and are really only appropriate in an ornamental pond. Exotic fish, in addition, tend to be more brightly colored and are more easily spotted (and eaten) by predators. If you are concerned about fish eating your frog and toad eggs or tadpoles, you can increase their survival by providing areas of shallow water and dense submergent plants or rock structures where eggs and developing tadpoles can hide from predators.

Adding any type of fish to your backyard pond means additional effort in maintaining water quality, temperature, and an adequate food source. Most fish also require a pond with at least two feet of water, although the exact depth depends on which type of fish you introduce. In general, it is recommended to add only one inch of fish for every five gallons of water (remember that fish grow, so try to factor in their adult length).


Many beneficial insects such as dragonflies, damselflies, and water striders are attracted to a wildlife pond, especially if you put large numbers of flowering plants in or near the pond. Attracting a variety of insects to your pond also means there will be adequate food for birds, fish, and amphibians.

Creating a Simple Backyard Pond

Below are general directions for a creating a simple backyard pond. If you want something more complex or want to add water features, consult one of the books listed under "Sources of Information."

Plan your pond.

Once you have decided on a site, outline a shape with string or a garden hose. Although the pond bottom does not have to be level, it is important that the top edges of the pond are level.

Excavate your pond to the desired depth.

Remember that you want at least some areas with shallow edges so that birds, amphibians, and other animals can use your pond. Because shallow water can heat more quickly and therefore encourage algae growth, keep shallow areas in a shady location.

Add shelves.

If you are going to have marginal or bog plants in your pond, you may want to add some shallow shelves within the pond to place the plants on.

Decide how much liner you need.

With a measuring tape, measure the maximum length of your pond. Start at the edge, go down to the maximum depth (include shelves), and measure across to the opposite side. Do the same for the maximum width. Add approximately two feet to both measurements. If you are unsure about your exact measurements, ask your supplier for help.

Place your liner in the pond.

If you are using an underlay, position it in place before the liner. Anchor the edge of your liner in place with rocks or bricks.

Add a bottom to your pond.

You can add a variety of different materials to the bottom, including sand or small rocks.

Add water.

Place a pump, if you are using one, in the bottom of the pond but raised slightly to avoid becoming clogged. Add water to your pond slowly. If you are using tap water and want to add fish, let the water sit for a day or two to let the chlorine evaporate.

Finishing touches.

Once the liner in the pond has settled, cut away excess liner to about six inches from the edge and cover with soil. Landscape the edge with plants. Enjoy!

Designing a Backyard Pond: Questions to Consider

Once you have decided what type of wildlife you want to attract, consider where to locate your pond. While an ornamental water garden can be placed almost anywhere in a yard, a wildlife pond should blend into the existing features of your yard and contain enough cover around it to make it a safe place for animals to use.

Some things that may influence your choice of where to put your pond are the following:

(Video) Wildlife Pond or Bird Bath?

How much space do I have?

A backyard pond does not need to be large; even a small, 4-by-4-foot pond will attract wildlife. But most pond builders wish that they had built a bigger, rather than a smaller, pond than they originally had. Try to estimate how much space you can reasonably devote to a pond so that it is still effective and yet does not overwhelm your yard.

How much runoff might it receive?

Be sure to put your pond in an area that does not receive runoff from surrounding lawns or roads. Runoff can introduce herbicides, fertilizers, insecticides, or other contaminants into the water.

How high is the water table?

Placing your pond in an area with a high water table will cause the liner of your pond to buckle. You may need to add a drain, or you may want to consider a more natural, earthen pond that does not require a liner.

How rocky is the soil?

A site with many large rocks or tree roots may require additional excavation or may ultimately damage the liner.

How level is the site?

Consider slope when selecting a place for your pond. A level site is easiest to design, excavate, and maintain. Although water features can be placed in a pond on a slope, this requires additional planning and materials.

How much shade or sun does the site receive?

A site with some shade is ideal, especially for a very small pond, since shade prevents overheating and excess algae buildup in your water. However, if you plan to add plants, especially many of the tropical water lilies, some will require a certain amount of daylight per day to bloom. Intermittent shade from deciduous trees is usually the most beneficial, as it warms the waters during the spring and fall, while providing cooling during the hot summer months.

Will the pond be located in a safe place?

The safety of your pond is an important consideration, since even a small pond can be hazardous for small children. You may also want to check with your insurance company on liability issues regarding your pond. Before you start digging, make sure there are no electrical lines beneath the soil, and check local ordinances to see if there are any restrictions on water depth or if you will need a fence around the pond. In addition, if you are using a pump or other feature requiring electricity, it will need to have approved electrical fittings, and an electrician may need to install the proper outlets for you.

What types of special water features do I want?

A backyard pond has an unlimited number of design possibilities. Many owners add features such as waterfalls, dripping fountains, bog gardens, separate fish pools, and recirculating streams. While you can add these features later, it is best to have some idea of what you ultimately want in a backyard pond to make designing and buying materials easier.

Choosing Materials for Your Pond

Companies that specialize in water gardens and backyard ponds can be helpful sources of materials and information. Many home and garden stores also provide materials and advice. The Internet can be useful for gathering information and comparison shopping, and many amateur web sites are devoted entirely to the successes and failures of pond building.


A liner is necessary for most backyard ponds to keep the water from escaping into your soil. Although it is possible to use concrete to line your pond, this material is difficult to work with and usually does not last for many years. A wide variety of flexible and preformed pools and liners are now available for a backyard pond, from many sources. When choosing a liner, you have many options.

Types of pond liners

A preformed plastic or fiberglass pond lasts the longest and resists puncturing, but it can be more expensive and difficult to install. Typically, these types of liners are also very small, steep, and deep, and therefore you would need to add a sloping edge to make this type a beneficial wildlife pond. Flexible liners are usually preferred because they allow flexibility in shape and size as well as a greater choice in liner material, thickness, and longevity. However, they typically require installation by at least two people and can be bulky and difficult to work with. Older liners may be made out of plastics such as PVC or polyethelene and are usually the least expensive.

Newer liners can consist of synthetic rubbers such as EPDM (ethylene propylene diene monomer) or a combination of materials, such as DuPont's Xavan® liners, which are the lightest and most tear-resistant. These also have the longest guarantee of all the newer flexible liners. An EPDM rubber liner is the most popular among pond builders, but it can be one of the heavier liners to work with. Whatever you decide to use, it is important to find a liner specifically designed for use in a pond--otherwise, it may be coated with toxic chemicals (for example, another type of EPDM liner is also used as a roofing liner). Swimming pool covers are not appropriate for use as a pond liner since they are coated with chemicals.

Longevity of liners

The longevity of the older liners varies widely, so check before you buy. In general, most newer liners are guaranteed for 25-50 years or longer. Resistance to ultraviolet (UV) light also affects the longevity of your pond liner, since sunlight can break down the material and create holes. Most newer liners are UV resistant, but some of the older ones may require additional protection from the sun. Finally, some liners are more susceptible to puncture than others, and you will want to know how easy it is to fix any holes you encounter in your pond liner.

Protecting the liner

In rocky soils, an underlay may be needed to protect the liner from tearing. Old carpeting or newspapers are usually recommended as a good underlay liner. Some newer liners (such as those made with Xavan) are very thick and puncture resistant, however, and will likely not require the use of an underlay.


You do not need a pump for your wildlife pond unless you add water features like a dripper or waterfall. Installing a small, recirculating pump adds a "gurgling" noise that attracts birds. But operating a pump also means that your pond must be located near an electrical source, and the pump may be costly to operate.

(Video) Water for Wildlife

The size of pump you need is determined by the gallons per hour (gph) that it can recirculate. Gph is determined by factors such as how much water you have in your pond, how far and high the water in your pond has to travel from a pump to a waterfall or other feature (both vertically and horizontally), and whether you also need the pump to circulate water through a filter. Although most smaller pumps are submersible and fulfill the needs of most wildlife ponds, a pond with large waterfalls or a large filter may require a bigger pump housed outside the pond.

After deciding on pump size, you will probably find many suitable models. Pumps can vary widely in price, energy efficiency, and longevity, and you should consider all these factors when choosing one. It is better to wait until you have your pond completely planned. Then give your supplier the dimensions and details of your pond and let him or her help you choose a pump of the right size.


You will need a filter for your pond if you plan to introduce a large number of fish. There are a few basic types of filters: mechanical, biological, and plant. A mechanical filter moves water through a filter pad and removes large particles that can make your pond look cloudy. Biological filters help to remove high ammonia concentrations in ponds where there are many fish. A plant filter is a type of biological filter. Water is moved through a gravel bed of aquatic plants where colonizing bacteria and enzymes remove ammonia from the water.

Adding Plants to Your Pond

Plants are a key part of a wildlife pond. They can help keep the pond ecologically balanced by shading the water, removing excess nutrients, and providing food for your fish.

There are four basic groups of plants that you can add to your pond and the surrounding edges: deep water, floating, submerged, and marginal plants. Although ideally you want to include a variety of each type, some plants have certain depth, sunlight, and temperature requirements and may not be appropriate for your pond.

Most suppliers of aquatic plants sell a wide variety of native and non-native species, but it is a good idea to consider primarily native aquatic plants. To help you decide which plants to add to your pond, a good plant guide is invaluable for determining sunlight and depth requirements, whether the plant is native or exotic, and within which zones each plant is hardy.

Deep-water Plants

The leaves of deep water plants typically float on the water's surface, but their roots grow in the soil (or pots). Water lilies are especially popular among pond builders, and there are endless varieties. But many tropical or subtropical species need long hours of direct sunlight and warm temperatures each day to bloom. In addition, both hardy and tropical species require protection in the winter (hardy species can remain in the pond as long as their roots do not freeze).

A combination of deep water and free-floating plants (see below) should not cover more than 70 percent of the pond's surface. This helps to keep a balanced amount of sunlight for shading the water (helping to reduce algae levels) but allows enough sunlight for submergent plants growing below the water. Although it is best to buy deep water plants directly in their containers, finding local suppliers of these plants may be difficult. Mail order companies sell bare-root plants that can later be put into pots.

Free-Floating Plants

The leaves of these plants float on the surface, but the roots are not anchored to the soil. Free-floating plants include species such as frog's bit and small duckweed. These and deep water plants both shade and remove nutrients from the water, helping to decrease algae outbreaks. Although many species of floating plants, such as water lettuce and water hyacinth, are considered very invasive in southern climates, they are not hardy in the north and will die during the winter (unless they are brought inside). However, experts recommend avoiding potentially invasive species. Plants that are hardy in northern climates fall to the bottom of a pond during the winter and reemerge in the spring. Northern-hardy plants can grow rapidly and may need to be thinned out periodically during the summer to prevent them from overtaking the pond.

Oxygenators or Submergents

These plants grow completely or primarily under water, releasing oxygen and filtering out excess nutrients. The recommendation is to add at least one bunch of submergents for every one to two square feet of water. Many of the plants found in this group can also grow quickly and can overtake a pond if they are not thinned out regularly. Native species include Illinois pondweed, Eastern purple bladderwort, hornwort, common water milfoil, and broad waterweed. Avoid exotic and invasive species like hydrilla, Eurasian water milfoil, and parrot feather.

Marginal or Bog Plants

The roots of marginals are submerged or partly submerged in the water; marginals include cattails and other grasses, rushes, and sedges. These plants are commonly grown in containers and placed on shelves within the pond or planted around its edges. Many types of emergent plants, such as spotted joe-pye weed, sweet flag, soft rush, and pickerel weed, are especially attractive to either butterflies or dragonflies.

Do not plant purple loosestrife. Although this plant has attractive purple flowers, it is extremely invasive.

There is no limit to the number of plants you can add to the surrounding areas of your pond. Many species attract butterflies and other insects as well as birds. Adding a diverse array of plants and grasses with logs and rocks will provide food and cover for both aquatic and terrestrial species around your pond. Beneficial native flower species that you can plant around your pond include joe-pye weed, cardinal flower, turtlehead, bee-balm, and black-eyed susan. Shrubs include black chokeberry, buttonbush, winterberry, and spicebush. The organizations listed in the Sources of Information section can provide more on native plants and their habitat requirements.


The required maintenance for your pond depends on many factors, including the pond location, whether you use a pump or a filter, the number of plants you add, and whether you keep fish. Often a small pond requires more maintenance than a larger one, since larger ponds tend to have a more balanced ecosystem.

Seasonal Maintenance

In the winter, both the fish and the floating plants in larger ponds can remain as long as the bottom of the pond does not freeze. You can add a heater to the pond in the winter. Many types are available; the size will depend on the pond size and how deep the water is. Suppliers of aquatic plants and fish can help you select a heater. If you are unsure whether your pond will freeze or don't want to install a heater, you can remove the fish and place them in an aquarium for the winter and store the plants with their pots in a cool place until spring.

(Video) Bird Bath (Garden Pond)

As spring approaches, you may want to empty and clean your pond. As plants die and materials accumulate on the bottom, occasional removal of debris is necessary. A pond that is balanced should not require yearly draining and cleaning. Smaller ponds may require emptying every two to three years; larger ponds may go longer. All the water needs to be removed and fish and plants placed in a temporary location. Mud and debris are removed from the bottom and any repairs can be made to the lining at this point. This is also a good time to add new plants, or to divide and repot overgrown or root-bound plants.

During the summer, you may want to check the water chemistry of your pond, especially if you have fish. Water loss can also be a problem during the summer owing to evaporation, and additional water may need to be added. Keep in mind, however, that tap water can contain chlorine and other minerals that may harm aquatic life or encourage algae blooms. If the deep water or floating plants in your pond become overgrown or invasive, you may need to remove or cut back some to keep the surface of your water at least 30-40 percent open.

Finally, during the fall, you may want to place a net over your pond to catch falling leaves. This will prevent an excess of decaying leaves in the bottom and lengthen the time between cleanings. You may also want to cut back the growth of any submergent or marginal plants.


Algae are a natural and necessary part of a pond ecosystem, but excessive algae buildup is a commonly cited complaint of many backyard pond owners. Two basic algae types may occur in your pond: microscopic plankton, which turn water into a pea soup color, and a type of filamentous algae (most commonly known as blanketweed), which occur in large mats. A proper balance of submerged and floating plants is the best prevention and cure for excessive algae problems that turn water green. Restricting your pond to a small number of fish also helps prevent the buildup of waste that encourages algae growth.

Algae blooms can be most problematic in the spring as sunlight and warmer temperatures increase mineral levels in the pond. This condition is usually only temporary, however, and continual changing of the water may make the problem worse. Blanketweed can appear in ponds with good and bad water quality; it is usually best dealt with by regular removal with a stick or rake and taken out of the pond (it makes a great mulch!). Although you may be tempted to use algaecides on blanketweed, you will find they provide only a temporary solution for the problem, which requires continual treatment.

The Finished Product

Once your pond is complete, sit back and enjoy the magic of water. Watch birds drinking and bathing, see dragonflies and damselflies racing back and forth, and watch the miraculous transformation of egg to tadpole to frog. Water works wonders for wildlife.

Suppliers of Liners, Pumps, and Filters

Check with your local garden store or plant nursery to see if it also sells equipment for backyard ponds. Other sources include:

Maryland Aquatic
Jarrettsville, MD
Large supplier of materials as well as plants

Ponds, Plants and More
Bentleyville, PA
Large supplier of pond supplies and plants

Suppliers of Plants

The Pennsylvania Native Plant Society has a listing of places in Pennsylvania (and surrounding states) that sell native species. In addition, the Pennsylvania Flora Project has a searchable database of native wetland species. The Pennsylvania Department of Conservation and Natural Resources publication Landscaping with Native Plants in Pennsylvania provides guidelines for selecting native plants to use in Pennsylvania. It is available free of charge. Call 717-787-3444 to request a copy.

Other retail suppliers

WaterWays Nursery
Lovettsville, VA 20180
Mail order supplier of aquatic and marginal plants

Lilyblooms Aquatic Gardens
North Canton, OH
Supplier of native and non-native aquatic plants and supplies, including mail order


Jennifer DeCecco, former wildlife extension assistant, and Margaret C. Brittingham, professor of wildlife resources.


Partial funding for this fact sheet was provided by Pennsylvania's Wildlife Resource Conservation Fund.


What can I put in my bird bath to keep water clean? ›

To keep your birdbath fresh, just rinse and scrub it with nine parts water, one part vinegar. Skip the synthetic soaps and cleansers; they can strip the essential oils off of bird feathers. And make sure to refill the water every other day to keep it from bugging up.

Can you put tap water in a bird bath? ›

What type of water is safe for birds? We are often asked whether tap water is safe for birds. The short answer is yes - generally speaking, if your tap water can be consumed by humans, it can be used in a bird bath. However, if you're still not sure, bottled spring water or filtered tap water will work too.

Do birds drink pond water? ›

Ponds and large water features are a good water source for birds, and better still are birdbaths, fountains and small water trays on dining stations.

Do copper pennies prevent algae? ›

Over time a birdbath can slowly have algae grow in it. However, copper pennies in bird bath may help you solve this problem. Copper has biostatic properties that makes it incompatible with algae. Due to this, a basin, bird bath, container, bathroom sinks, or copper sinks will not trigger algae growth.

What kills algae in bird baths? ›

One of the best ways to clean a bird bath is with vinegar. Simply scrub away the algae, rinse the bath with water, then fill it with diluted vinegar. Then, leave the vinegar solution in the bird bath for approximately 10-15 minutes, long enough to kill all the algae.

Can you have a water feature in a wildlife pond? ›

It is relatively safe to use a waterfall feature in a wildlife pond, as previously mentioned they do help to oxygenate the water.

Should a wildlife pond have a fountain? ›

Either or both is fine but they are not necessary. However, water cascading over rocks can have a filtering effect and add oxygen to the water. A fountain just adds oxygen. But both can help to bring a dynamic quality to any pond.

What kind of water feature do birds like? ›

A stream is a natural flowing water source that is especially attractive to birds. Not only does a stream offer water, but also an added benefit of a food source in insects.

Is bottled water safe for birds? ›

Or, if you see discolored areas in a plastic dish, that's probably bacteria as well.” When providing water to your birds, you have two main options: bowls and crocks or water bottles. “Each of those sources of water — bottles, crocks, bowls, etc. —can and do work fine,” Dr.

Should a bird bath be in the sun or shade? ›

In addition, it's best to keep your bird bath out of direct sunlight so the water doesn't get too hot and undesirable. Placing a bird bath in a sheltered, shady spot can dramatically reduce the evaporation rate of the water so it will not dry out as quickly.

How often should I change the water in a bird bath? ›

Birdbaths should be cleaned when the water is changed, which is approximately every 2 to 4 days. During the summer months, the water will evaporate more quickly requiring more refills and possibly more cleanings.

Should you leave water out for wildlife? ›

WildCare strongly recommends against putting out water for wildlife. Why? Stagnant water is a dangerous breeding ground for bacteria and disease, both of which spread easily between animals at a water source.

How do you give wild birds water? ›

Good birdbaths are similar to shallow puddles, the natural birdbaths in the wild for birds. Choose a shallow container that is easy to clean, such as an old frying pan, shallow baking pan, or plastic lids of large containers.

Do squirrels drink from bird baths? ›

Squirrels need a consistent source of fresh water to drink and aid in grooming, safe places to hide from predators, natural food sources, and nesting material. To help squirrels thrive in your yard, be sure to have an accessible water dish or bird bath with fresh, clean water available at all times.

How many pennies should you put in a bird bath? ›

To keep algae growth from your bird bath drop some pre-1982 copper pennies in. I have what I would call a normal size bird bath & I use 7 pennies. The reason for the pennies being pre-1982 is that before that year, the pennies contained copper, a natural algicide.

Can I put apple cider vinegar in my bird bath? ›

To keep algae growth down and your bird bath clean, add 1 capful of apple cider vinegar or 1 teaspoon per gallon of water to the bird bath. The apple cider vinegar also provides vitamins & minerals to the birds.

Is a copper birdbath harmful to birds? ›

Is copper safe for birds? Drinking water from a copper vessel is perfectly safe for birds. The levels of copper required to cause toxic effects in birds is far far higher than the amount of copper that will leach into the water from a copper bird bath.

How do you keep a bird bath water from turning green? ›

Adding 1 tsp of apple cider vinegar per gallon of water will help prevent algae from growing in your bird bath. It makes the water slightly acidic which kills the algae.

Why does the water in my bird bath turn green? ›

Bird baths can become dirty over time due to bird droppings, leaves and other plant matter, dead insects, dust, and feathers. A build-up of algae will eventually turn the water into a pool of green or red slime.

Do mosquitoes breed in bird baths? ›

Birdbaths also create the perfect breeding ground for bloodthirsty mosquitoes. Everyone knows that mosquitoes breed in standing water but what most people don't realize is that their birdbaths are the ideal mosquito nursery.

How do you keep wildlife pond water clear? ›

During hot calm days where the water's still and warm from the sun, you can try breaking the surface with a brief spray of a hose, to disturb and aerate the water a little. Introducing plants like waterlillies, which have floating leaves, can also help, by reducing the amount of sunlight the algae can get.

What should I put in the bottom of my wildlife pond? ›

Pond substrates – Use sand and washed gravel, to provide a substrate for planting into, and places for creatures like dragonfly larvae to burrow into. Let wildlife come to your pond naturally You don't need to add sludge, from another pond, to your pond to 'get it started'.

Should a wildlife pond have a pump? ›

Does a wildlife pond need a pump? No, wildlife ponds do not need pumps. As opposed to other types of ponds, wildlife ponds are an organic, natural environment that relies on the number of plants and water to attract insects and animals such as dragonflies, frogs and newts.

How do I keep my wildlife pond from turning green? ›

Fences, pergolas and even sheds can provide shade, as can plants like water lilies. Plants will also compete with algae for nutrients, starving them of nourishment, which is what algae control solution does. Another way to reduce the amount of nutrients algae get is by being careful not to overfeed fish in your pond.

Should wildlife ponds be sun or shade? ›

Warm, sunny sites are best for most wildlife, so try and make sure your pond as an open view to the south side.

How do you oxygenate a wildlife pond? ›

A very simple way to add oxygen to the pond is to add an air pump. Sitting at the side of the pond, it will pump air through a small hose to an air stone and bubbles will enter the water. When the bubbles break the water's surface oxygen will then be added.

What is the best color for a bird bath? ›

Any bright or primary colors are the best colors to paint bird baths. These colors include red and pink to attract hummingbirds, orange to attract orioles, blue to attract bluejays, and yellow to attract goldfinches. Drab camouflage colors like green can attract skittish birds. However, white scares birds away.

Do bird baths need running water? ›

The water should be no deeper than 0.5 to 1 inch at the edges, sloping to a maximum of 2 inches deep in the middle of the bath. One of the best ways to make your birdbath even more attractive is to provide dripping water. Many birds find the sight and sound of moving water irresistible.

Why don't birds use my birdbath? ›

Birds might not use your bird bath for many reasons. Many birds dislike deep water, slippery surfaces, wide-open locations, and dirty water. Other birds possess a serious distaste for warm water, highly placed basins, no staging or preening perches, and stagnant water that doesn't move.

Is distilled water safe for wild birds? ›

Distilled water is beneficial to hamsters, guinea pigs, birds, rabbits, reptiles, amphibians, and even horses. Farmers use distilled water to keep their animals healthy because it is both safe and clean.

Where do wild birds get water? ›

This is one example of where birds get water – by eating insects. Another source of water for wild birds is plants. Many species of birds eat buds, leaves, flower petals and other plant parts, extracting water from the vegetation they eat.

Is distilled water OK for birds? ›

All pets will benefit from drinking distilled water. Hamsters, guinea pigs, birds, rabbits, reptiles, amphibians, and even large animals like horses enjoy drinking distilled water. In fact, some farmers use distilled water for their animals because it is clean and the animals like it.

Should I put a rock in my birdbath? ›

Putting stones or rocks in your bird bath will provide a shallow and non-slippery perch to more readily attract small birds. Whether they come to your bird bath for a drink or a bath they may enjoy some strategically placed stones in your bird bath.

Do bird baths attract snakes? ›

Water Sources

Birdbaths not only provide a source of water but they also attract birds, another common food source for snakes. If possible, raise your birdbaths and keep them farther away from your home.

How high should a bird bath be off the ground? ›

* The bath should be easily seen from the sky, so birds flying overhead can spot it. * Mount it about 3 feet high, which is usually the case if your birdbath comes with a pedestal. If you must keep a birdbath on the ground, it should be at least 6 feet away from places where cats could lurk. * Put it in a sunny spot.

Can you put bleach in bird bath water? ›

Using a hose with a high-pressure nozzle, spray off any built up algae or dirt. Add water to the bird bath until it's almost full. Then add 1 to 1 1/2 cups of bleach. Cover the entire bath with a black trash bag to prevent any birds from getting to the bleach water.

How do I keep my fountain water clean and safe for birds? ›

When you must remove significant limescale buildup without killing the birds that like to dunk in your fountain, use household distilled white vinegar. If you drained the fountain before cleaning, use a diluted mixture of 1 part vinegar to 9 parts water.

Can you use baking soda to clean a bird bath? ›

One of the best ways to use baking soda in the garden is to clean your bird bath. “Shake baking soda into the basin. It removes mold easily and is safe for birds,” says Birds & Blooms reader Stephen Holland. “Cleaning the bird bath isn't my favorite task, but it's more fun when you use baking soda and white vinegar.

How do I provide water to my backyard wildlife? ›

In urban and suburban areas consider these options for adding a water source for wildlife. For a small spaces, consider adding bird baths and container water gardens. For larger properties, consider adding a rain garden, pond, or backyard marsh.

How do you make a wildlife water source? ›

You can provide this habitat component in a variety of ways, from a simple birdbath or shallow dish of water to a water garden or pond. Other water sources may include natural features such as ponds, lakes, rivers, springs, oceans and wetlands. Any natural water source on your property can count.

Will wild birds drink water from a bowl? ›

Tap water is safe for wild birds, as is filtered water and spring water, so it is fine to top up your backyard birdbath or garden water bowls from your domestic water supply.

Where should I put water for birds? ›

A good bird bath has a simple, sturdy construction, but is light enough to make it easy to clean and refill. It needs to have shallow sloping sides with a shallow approach to water. To allow different species to bathe, provide a sloping bath, so the water is between 2.5cm and 10cm (1-4 inches) deep.

What can I put in my bird bath water? ›

To keep your birdbath fresh, just rinse and scrub it with nine parts water, one part vinegar. Skip the synthetic soaps and cleansers; they can strip the essential oils off of bird feathers. And make sure to refill the water every other day to keep it from bugging up.

How do you keep birds water from freezing? ›

It can be difficult to stop a bird bath from freezing, but try these simple methods: A light ball floating in the water will be moved by even a gentle breeze, and will keep a small amount of water ice-free. Pour on hot water to melt the ice. Line the bath with a polythene sheet that you can lift out along with the ice.

Do bird baths attract mice? ›

Water is another reason why mice would be attracted to your land, and this is even more so the case if you have ponds, pools, or even bird baths. Mice actually drink quite a lot of water, although not quite so much as rats, and they almost always look for a nesting spot that is close to a source of water.

Do bird baths attract rodents? ›

Do Bird Baths Attract Rats? No. Typically there is plenty of water outside for rats. And most of their required moisture is obtained from foods they eat.

Do bird baths attract coyotes? ›

Diverse Species

The more natural vegetation cover surrounds the bath, the better it will attract birds. These sources of water also attract other types of wildlife, such as Gray Foxes, Bobcats, and Coyotes.

Is vinegar harmful to birds? ›

Many people often wonder if it is safe to use vinegar in their bird's water or food dishes. The short answer is yes. Vinegar is safe for birds, provided you use apple cider vinegar (ACV) and follow the proper dosage guidelines.

Does vinegar in Fountain harm birds? ›

Not only does it look quite ugly, but it can be harmful to many of the plants, birds and insects that love to visit your garden. If you have an algae problem, your best friend is white vinegar. White vinegar can quickly kill algae but is not harmful to birds, insects and the majority of plants.

Can you put bleach in bird bath water? ›

Using a hose with a high-pressure nozzle, spray off any built up algae or dirt. Add water to the bird bath until it's almost full. Then add 1 to 1 1/2 cups of bleach. Cover the entire bath with a black trash bag to prevent any birds from getting to the bleach water.

Can I put apple cider vinegar in my bird bath? ›

To keep algae growth down and your bird bath clean, add 1 capful of apple cider vinegar or 1 teaspoon per gallon of water to the bird bath. The apple cider vinegar also provides vitamins & minerals to the birds.

What can I put in my bird bath to keep mosquitoes away? ›

Keep your bird bath clean.

If you see the water is discolored or there is algae, scrub your bird bath with baking soda, lemon juice or white vinegar and then rinse well. Never add chemicals to the water! Add motion to the water in your bird bath, if you are still worried about mosquitoes.

How much apple cider vinegar do I put in my birds water? ›

Adding a little raw apple cider vinegar to the hand-feeding formula water can prove nutritionally beneficial and help to inhibit the growth of yeast, fungus and bacteria. In formula a ratio of about ¼ tsp per 4 oz water is best.

How much apple cider vinegar should I put in my birds water? ›

Apple Cider Vinegar for Pet Birds! | BirdNerdSophie - YouTube

How do you keep outdoor fountains clean and safe for birds? ›

When you must remove significant limescale buildup without killing the birds that like to dunk in your fountain, use household distilled white vinegar. If you drained the fountain before cleaning, use a diluted mixture of 1 part vinegar to 9 parts water.

Will a little bleach in fountain harm birds? ›

Jeremy Yamaguchi, the CEO of Lawn Love (opens in new tab), seconds this opinion: 'You should never use bleach on a water feature. For a fountain, it can damage the pump. For a pond or anywhere that wildlife can reach, you could potentially harm or even kill fish, birds, amphibians, etc.

How do I keep my fountain water free of algae? ›

Since the algae thrives on sunlight, place your fountain in a shady location. No light to take energy from, no algae growth! Use fresh distilled water for your water feature. Tap water contains debris and minerals which algae may also feed upon.

Should I put pebbles in my bird bath? ›

Putting stones or rocks in your bird bath will provide a shallow and non-slippery perch to more readily attract small birds. Whether they come to your bird bath for a drink or a bath they may enjoy some strategically placed stones in your bird bath.

What is the best color for a bird bath? ›

Any bright or primary colors are the best colors to paint bird baths. These colors include red and pink to attract hummingbirds, orange to attract orioles, blue to attract bluejays, and yellow to attract goldfinches. Drab camouflage colors like green can attract skittish birds. However, white scares birds away.

How often should I change the water in my bird bath? ›

Birdbaths should be cleaned when the water is changed, which is approximately every 2 to 4 days. During the summer months, the water will evaporate more quickly requiring more refills and possibly more cleanings.

How do you keep a birdbath from turning green? ›

Scrub your birdbath immediately if algae start to grow. Use very hot water and a good scouring brush. Water in birdbaths should be changed at least every three days, and in warm weather even more often.

How do you keep a bird bath full? ›

Add ice to the bath each morning – freeze a block of ice in a plastic bowl each night – and as the ice melts, it will refill the bath and keep the water fresh. Reflections off the ice can also help attract birds to the water source, and the cooler water will resist algae and bacteria growth.

Does vinegar in bird baths harm birds? ›

Using vinegar to clean your bird bath is a natural non-toxic method that doesn't use harsh detergents that could strip the birds' feathers or make them sick.


1. EcoBeneficial Tips: Water Features for Birds & Other Wildlife
2. Summer water for Wildlife
(Ernie McLaney - Charlotte Wildlife Stewards)
3. Simple Backyard Water "Drip" to Attract Birds for Photography
(Wildlife Inspired w/ Scott Keys)
4. Mini pond with bird bath - day 1
(Alice Le and the family)
5. Water for Wildlife - tips & inspiration
(RSPB Video)
6. Simple Garden Birdbath and Wildlife Water Feature
(Oklahoma County OSU Extension)

Top Articles

Latest Posts

Article information

Author: Francesca Jacobs Ret

Last Updated: 01/05/2023

Views: 5480

Rating: 4.8 / 5 (68 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Francesca Jacobs Ret

Birthday: 1996-12-09

Address: Apt. 141 1406 Mitch Summit, New Teganshire, UT 82655-0699

Phone: +2296092334654

Job: Technology Architect

Hobby: Snowboarding, Scouting, Foreign language learning, Dowsing, Baton twirling, Sculpting, Cabaret

Introduction: My name is Francesca Jacobs Ret, I am a innocent, super, beautiful, charming, lucky, gentle, clever person who loves writing and wants to share my knowledge and understanding with you.