Softball Field Dimensions Guide for All Leagues (2024)

FAQs

What are the dimensions of the softball field? ›

A standard Little League field has base paths of 60 feet, and a pitching distance of 46 feet (measured from the back point of home plate to the front edge of the pitcher's plate) .

Bases shall be 60 feet apart for games using the 12-inch ball and 65 feet for games using the 11-inch ball. b. (F.P.) The rear tip of home plate and the front edge of the pitcher's plate shall be 43 feet for female fast pitch softball and 46 feet for male fast pitch softball.

In adult slowpitch softball, the field dimensions are: Distance between bases: 65 feet (19.81 metres). Pitching distance: 50 feet (15.24 metres). Minimum outfield distance: 275 feet (83.82 metres).

The perimeter of the softball field is any area not found within the diamond, infield or outfield. If a batter hits the ball into these areas, then it's a foul ball. Yet, the opposing team can still catch the ball before it hits the ground for an out.

Following the straight line from the apex to the center of second base, measure a line from the apex to the spot where the front of the pitching rubber will be. Square up the pitching rubber by measuring an equal distance from the front corners of home plate to the corresponding corners on the pitching rubber.

With a pitching distance of 50 feet and base path distance of 70 feet. The recommended range of distance, during regular season, from home plate to the outfield fence is 200 to 275 feet.

Field size means the dimensions along the major axes of an area in a plane perpendicular to the specified direction of the beam of incident radiation at the normal treatment distance and defined by the intersection of the major axes and the 50 percent isodose line.

Is softball harder than baseball? ›

However, it is scientifically proven that softball is harder than baseball. The speed of pitches, the reaction time for hitters and fielders, and the distance of the field indicates that softball is indeed harder than baseball.

The batter-runner after reaching first base may continue on, without stopping, in an attempt to reach second base. Said runner may stop in the baseline after rounding first base. At this point, the umpire should begin a three-second count on the runner.

The softball pitching circle is a 16′ diameter circle.

Reference the Softball Field Dimensions Diagram on pages 12-13 for the distance for your governing body and league. The Pitcher's Lane is a chalked lane within the softball pitching circle.

Field Size: A softball field is measured with 60 ft between each base, but a baseball field is 90 ft. Regulation Innings: A standard softball game is played with seven innings while a standard baseball game is played with nine.

College Softball Field Diamond Dimensions

Home plate to second base: This should be a distance of 84 feet and 10 and 1/4 inches from the back tip of home to the base. Distance between bases: Measure 60 feet between first, second and third bases.

How far are the fences in college softball? 4-foot fence at 210 feet in right and left fields and 230 feet in center field.

On average, you'll need about 4.5 acres of land to complete a regulation-size baseball field with a 90-foot base layout. Softball fields with a 60-foot baseline typically require a minimum of 1.5 acres for just the field. Additional space is necessary for parking and any food stands.