- Thread starterHighvoltage
- Start dateFeb 20, 2022
Help Support Long Range Hunting Forum
Become a supporting member
RUFFIAN R - NY
Well-Known Member
- Joined
- Jan 20, 2022
- Messages
- 511
- Location
- Rockland County New York
- Feb 23, 2022
- #15
I forgot LilJa x1 Schneider x1, have 2-3 more but they are all the way in the back can't reach at this time.
sierracharlie338
Well-Known Member
- Joined
- Feb 18, 2013
- Messages
- 2,321
- Location
- Texas
- Feb 23, 2022
- #16
I only heard the following outside of this thread:
Crazy long wait time (may have changed)
A few people with problem barrels that had to be sent back or replaced.
Percentage wise, more good reviews than problem ones.
- Joined
- Sep 27, 2011
- Messages
- 4,882
- Location
- Southern Arizona
- Feb 23, 2022
- #17
Bought a action from them with a 300WSM barrel and it was done in 3 weeks. No complaints here. My 3rd one.
T
Tcross
Well-Known Member
- Joined
- Oct 24, 2014
- Messages
- 98
- Location
- Wyoming
- Feb 24, 2022
- #18
I will gladly buy from these folks again at some point. And I had to deal with a small issue on a 7BR barrel they made for me a couple years ago. The guy who took my order over the phone wasn't working there any more by the time I got my barrel, and Bryce stepped in and did everything he needed to, to make it right. (Previous guy left out some of my details about freebore) Sent it back for an easy fix to extend freebore and cost me a week and a half that I wasn't shooting during the winter anyways. Sure, it didn't need to happen, but it could have happened anywhere. The way Bryce made it right is what sold me on positive feedback. Now, if the barrel didn't shoot, I would have chocked it up to a bad experience and moved on. But I'm happy with it and will continue to compete with it, and when the time comes I need another, I will certainly look their way. I'll throw in a couple of 3 shot pics at 200yds. during load development for fun. Just a couple of many, but typical.
H
Highvoltage
Well-Known Member
- Joined
- Feb 10, 2019
- Messages
- 464
- Location
- West virginia
- Feb 24, 2022
- #19
Sounds good! Did you guys get those barrels lapped? What contour did you use for hunting? I was originally thinking tikka lite contour but now I'm wondering if I should go heavier.
- Joined
- Sep 27, 2011
- Messages
- 4,882
- Location
- Southern Arizona
- Feb 24, 2022
- #20
Highvoltage said:
Sounds good! Did you guys get those barrels lapped? What contour did you use for hunting? I was originally thinking tikka lite contour but now I'm wondering if I should go heavier.
NO, didn't need to. They cleaned up so easily I never even gave it a thought.
- Joined
- Sep 27, 2011
- Messages
- 4,882
- Location
- Southern Arizona
- Feb 25, 2022
- #21
Here is the 300WSM I just got from them on Tuesday. These guys sell the complete line of Curtis actions also and the Kelbly Atlas action. That's the Matte blued finish on the barrel and matches nicely with the Nitride on the Kelbly. This is a 22", 810 straight taper 10 twist with straight flutes and a 5/8-24 threaded muzzle. Great service. My Grayboe Trekker and bottom metal will be here today and I'll have it together later this evening. TriggerTech special going on it.
S
Shane Lindsey
Well-Known Member
- Joined
- Jul 13, 2010
- Messages
- 3,558
- Feb 25, 2022
- #22
Customer service is very good. Talked me through what I needed. Appreciated that aspect. Barrel was delivered in about a month.
It ia a 338 Sherman. I am not seeing anywhere close to the velocities posted on here. Accuracy is not very good either. Still working through it before I have it scoped to see if it is internal or what.
If it is the barrel, I will engage with them. Bad ones happen. I'm sure they will make it right. Based on their customer service alone, I would use them again.
Kmccord
Well-Known Member
- Joined
- Nov 30, 2016
- Messages
- 1,541
- Location
- Reilly Springs, TX
- Feb 25, 2022
- #23
JAYgs8163 said:
Here is the 300WSM I just got from them on Tuesday. These guys sell the complete line of Curtis actions also and the Kelbly Atlas action. That's the Matte blued finish on the barrel and matches nicely with the Nitride on the Kelbly. This is a 22", 810 straight taper 10 twist with straight flutes and a 5/8-24 threaded muzzle. Great service. My Grayboe Trekker and bottom metal will be here today and I'll have it together later this evening. TriggerTech special going on it.
View attachment 344428View attachment 344429
What is the weight on that barrel, I have been looking at there Taperless for my builds?
H
Highvoltage
Well-Known Member
- Joined
- Feb 10, 2019
- Messages
- 464
- Location
- West virginia
- Feb 25, 2022
- #24
He told me their .75 taperless at 26" was 3.27 lbs. I planned on ordering a tikka lite contour but now they have me thinking since there's roughly a 1/4 lb difference
- Joined
- Sep 27, 2011
- Messages
- 4,882
- Location
- Southern Arizona
- Feb 25, 2022
- #25
Kmccord said:
What is the weight on that barrel, I have been looking at there Taperless for my builds?
The .810 is about 3.5 Lbs at 26". I'm thinking at 22" it's about 3/4 of lb less. So about 2.75 maybe a tad less since it's fluted.
Kmccord
Well-Known Member
- Joined
- Nov 30, 2016
- Messages
- 1,541
- Location
- Reilly Springs, TX
- Feb 26, 2022
- #26
JAYgs8163 said:
The .810 is about 3.5 Lbs at 26". I'm thinking at 22" it's about 3/4 of lb less. So about 2.75 maybe a tad less since it's fluted.
Let us know how it shoots when you finish putting it together, looks very nice.
L
long shooter
New Member
- Joined
- Apr 26, 2022
- Messages
- 1
- Location
- MN.
- Apr 29, 2022
- #27
They did a 260 rem. for me.....hell of a shooter 1/4 or better @ 100yds. They did not lap barrels at that time but i see it is an option now. If this powder etc. shortage straightens out i will be getting a 243Ai from them also. I am very happy with mine.
H
Highvoltage
Well-Known Member
- Joined
- Feb 10, 2019
- Messages
- 464
- Location
- West virginia
- May 27, 2022
- #28
Just a follow up on preferred barrel blanks…
Customer service was excellent and the barrel turned out great. I finally made it out and got a few rounds down the barrel. This 3 shot group was rounds 9-12. This was a seating depth test/ barrel break in with a mild load of 7828, 147 eldm, adg 6.5 saum brass. Needless to say I think I have something to work with. Thanks to everyone who had good reviews for pbb, made my choice easy.
Tikka t3 ss action factory trigger
Pbb .750 straight taper gap 6.5 saum 8 twist 25"
Lri tikka magnum bolt spiral fluted
Tikka wood stock steel lug bedded
Sportsmatch rings
Sightron stac 3-16 zero stop
