Cubes, Conic Sections, and Crockett Johnson - Classic Greek Constructions (2024)

Author(s):

Stephanie Cawthorne (Trevecca Nazarene University) and Judy Green (Marymount University)

What tools did Euclid use in these constructions? Did he follow the tradition of the Greek philosophers, using only a compass and unmarked straightedge, or did he use a ruler with some type of markings such as centimeters, or a tool like a protractor? It is clear from the postulates and propositions in Book I that actual lengths, which would require units of measurement, were not being used, hence there would be no rulers with markings nor would there be protractors. Euclid’s Postulate 3, which hypothesizes the existence of compasses (“To describe a circle with any centre and distance” Euclid 1956, I:154), does not actually describe the instrument we now call a compass. Rather, the compass Euclid postulated lost its setting when it was picked up and is referred to as a collapsing, or collapsible, compass. If one considers the content of Propositions I.2 and I.3 (“To place at a given point (as an extremity) a straight line equal to a given straight line” and “Given two unequal straight lines, to cut off from the greater a straight line equal to the less” [Euclid 1956, I:244 and 246]), one can see that a collapsible compass can do all that a non-collapsing compass can. Thus, we can assume Euclid’s compass was non-collapsing. Heath remarked on this in his commentary on the Elements [Euclid 1956, I:246]:

Proclus alludes … to the error of those who proposed to solve [Proposition] I.2 by describing a circle with a given point as center and with a distance equal to [the given straight line], which he says is a petitio principii [begging the question]. De Morgan puts the matter very clearly… We should “insist,” he says, “here upon the restrictions imposed by the first three postulates, which do not allow a circle to be drawn with a compass-carried distance; suppose the compasses to close of themselves the moment they cease to touch the paper. These two propositions [I. 2, 3] extend the power of construction to what it would have been if all the usual power of the compasses had been assumed; they are mysterious to all who do not see that postulate iii does not ask for every use of the compasses.”

As we consider the role of constructions in the Elements, we will ask if, given a line segment of length \(1,\) is it possible to construct a segment of some other length using only a straightedge and compass? For example, given a segment of length \(1,\) can we construct segments of length \[2,\,\,{\sqrt{2}},\,\,{\rm or}\,\,\,{\sqrt[{\scriptstyle 3}]{2}}\] using only those instruments? Proposition I.2 allows us to construct a segment of length \(2\) by simply placing “at a given point [one endpoint of the given segment of length \(1\)] a straight line equal to the given straight line,” i.e., by just copying the segment of length \(1.\) To construct a segment of length \({\sqrt{2}},\) we simply construct an isosceles right triangle with legs of length \(1\) and then use the Pythagorean Theorem to show that the hypotenuse has length \({\sqrt{2}}.\) In general, we will say that a number is constructible if a segment of that length can be constructed using only a straightedge and compass.

There are other relatively simple constructions, though not necessarily the ones employed by Euclid, that illustrate arithmetical calculations. For example, given a segment of length \(1,\) it is certainly possible to construct an arbitrary positive integer by just repeated copying of segments. Also, if \(a\) and \(b\) are constructible, then \(a+b\) and \(a-b\) \((a>b)\) are constructible: we get the sum by copying a segment of length \(b\) at the end of a segment of length \(a\) and get the difference by applying Proposition I.3. The diagrams in Figure 1 (below) display methods for constructing \(ab\) and \(a/b\) for \(b\not=0.\) In each of these diagrams we find the point D by constructing a line parallel to AB through C. The calculations needed to show that \(x=ab\) and \(y=a/b,\) respectively, rely on the fact that the construction yields similar triangles so that corresponding sides are in proportion. Thus the diagram on the left gives \[{\frac{a}{1}}={\frac{a+x}{1+b}}\] and the one on the right gives \[{\frac{b}{1}}={\frac{b+a}{1+y}}.\]

Cubes, Conic Sections, and Crockett Johnson - Classic Greek Constructions (1)

Figure 1. Construction of \(ab\) and \(a/b\) from \(a\) and \(b.\) (Constructed using Geometer’s Sketchpad.)


Although it is not quite as obvious, it is not difficult to show that if \(a\) is constructible, then \({\sqrt{a}}\) is also constructible. This construction can be shown using a mean proportional, i.e., the solution to the equation \[{\frac{a}{x}}={\frac{x}{b}}\,\,\,{\rm or}\,\,\,x=\sqrt{ab}.\] It is common to see mean proportionals introduced using the diagram on the left in Figure 2 (below), where all three triangles are right triangles. This diagram can be used to prove that the three right triangles are similar and, therefore, the vertical line is the length of the mean proportional between \(a\) and \(b.\) We can form the diagram on the right by describing a circle with center the midpoint of a segment of length \(a+1.\) Since angles inscribed in semicircles are right angles, the diagram shows the mean proportional between \(a\) and \(1,\) i.e., \({\sqrt{a}}.\)

Cubes, Conic Sections, and Crockett Johnson - Classic Greek Constructions (2)

Figure 2. Construction of \(x=\sqrt{ab}\) and of \(x=\sqrt{a}.\) (Constructed using Geometer’s Sketchpad.)


Since whole numbers are constructible, any number that can be built up from a whole number using a finite number of the “operations” of \(+,\) \(-,\) \(\cdot,\) \(\div,\) and \(\sqrt{\phantom{xx}},\) is constructible. Thus, all (positive) rational numbers, and at least some positive irrational numbers, can be constructed. However, since \({\sqrt[{\scriptstyle 3}]{2}}\) is not a rational number or a finite application of square roots, it cannot be constructed in the manner we have outlined, leaving unanswered the question whether it can be constructed using only a straightedge and compass. In the seventeenth century, René Descartes, after whom the Cartesian coordinate system is named, showed that straightedge and compass constructions could be expressed algebraically in terms of the solution of iterated quadratic equations. Since François Viète had shown earlier that both trisection of an angle and duplication of a cube lead to cubic equations, Descartes concluded that neither of these problems was soluble with straightedge and compass. Although Descartes’ conclusion is correct, a rigorous proof depends on concepts that had not yet been formulated. The final proof that \({\sqrt[{\scriptstyle 3}]{2}}\) is not constructible using a compass and unmarked straightedge is generally credited to Pierre Wantzel in a paper published in 1837. Since it is necessary to construct a segment of length \({\sqrt[{\scriptstyle 3}]{2}}\) in order to duplicate a cube with edge of length \(1,\) this proof also showed that it is impossible to double an arbitrary cube with only a compass and an unmarked straightedge. In fact, none of the three Greek problems can be solved with only a compass and an unmarked straightedge.

We may now ask if there are other techniques that make the duplication of a cube possible. One answer involves conic sections but we will temporarily delay explaining how conic sections are involved and, instead, turn to the question of how an author of children’s books became interested in constructibility problems.

Stephanie Cawthorne (Trevecca Nazarene University) and Judy Green (Marymount University), "Cubes, Conic Sections, and Crockett Johnson - Classic Greek Constructions," Convergence (March 2014)

Cubes, Conic Sections, and Crockett Johnson - Classic Greek Constructions (2024)

FAQs

What are the Greek conic sections? ›

The curves known as conic sections, the ellipse, hyperbola, and parabola, were investigated intensely in Greek mathematics. The most famous work on the subject was the Conics, in eight books by Apollonius of Perga, but conics were also studied earlier by Euclid and Archimedes, among others.

What made the ancient mathematicians came up with the discovery of conic sections? ›

A more plausible theory is that they were discovered when attempting to double the cube. That conic sections were forgotten with the decline of Hellenistic mathematics is correct. But this applies also to the other great works of that epoch (Archimedes).

What are the different conic sections and their common parts? ›

Conic sections or sections of a cone are the curves obtained by the intersection of a plane and cone. There are three major sections of a cone or conic sections: parabola, hyperbola, and ellipse(the circle is a special kind of ellipse). A cone with two identical nappes is used to produce the conic sections.

What are the three Greek structures? ›

The first three orders, Doric, Ionic, and Corinthian, are the three principal architectural orders of ancient architecture. They were developed in ancient Greece but also used extensively in Rome.

What is an example of a conic section in real life? ›

Conic sections – the curves made by slicing through cones at various angles – were studied by the ancient Greeks, but because of their useful properties, have many real-world uses. Planets have elliptical orbits, projectiles move in parabolas, and cooling towers have hyperbolic cross-sections.

What are some interesting facts about conic sections? ›

  • The conic sections have been studied for thousands of years and have provided a rich source of interesting and beautiful results in Euclidean geometry.
  • A conic is the curve obtained as the intersection of a plane, called the cutting plane, with the surface of a double cone (a cone with two nappes).

Who is the Greek mathematician who made a thorough investigation of the conic sections? ›

Apollonius of Perga (born c. 240 bc, Perga, Pamphylia, Anatolia—died c. 190, Alexandria, Egypt) was a mathematician, known by his contemporaries as “the Great Geometer,” whose treatise Conics is one of the greatest scientific works from the ancient world.

Why are they called conic sections? ›

Conic sections get their name because they can be generated by intersecting a plane with a cone. A cone has two identically shaped parts called nappes. One nappe is what most people mean by “cone,” having the shape of a party hat.

What is the difference between conic and conic section? ›

A conic section is the intersection of a plane and a double right circular cone . By changing the angle and location of the intersection, we can produce different types of conics. There are four basic types: circles , ellipses , hyperbolas and parabolas .

How to memorize conic section formulas? ›

Answer and Explanation:
  1. Write down all the 4 conic section types(circle, parabola, hyperbola & ellipse) along with their basic equation and other formulas, like of their eccentricities, etc. ...
  2. Do include diagrams for each one of them.
  3. Read them all once, understand each one.

What is the general formula of a conic section? ›

Conic Sections Equations
Conic section NameEquation when the centre is at the Origin, i.e. (0, 0)
Circlex2 + y2 = r2; r is the radius
Ellipse(x2/a2) + (y2/b2) = 1
Hyperbola(x2/a2) – (y2/b2) = 1
Parabolay2 = 4ax, where a is the distance from the origin to the focus

What are the 4 conic sections? ›

The four basic types of conics are parabolas, ellipses, circles, and hyperbolas. Study the figures below to see how a conic is geometrically defined. In a non-degenerate conic the plane does not pass through the vertex of the cone.

What are the three basic conic sections? ›

The three types of conic section are the hyperbola, the parabola, and the ellipse; the circle is a special case of the ellipse, though it was sometimes called as a fourth type.

What are the Greek solid shapes? ›

The ancient Greek mathematician Euclid proved in his Elements of Geometry that there are only five Platonic solids – the regular tetrahedron (four sides that are equilateral triangles), the cube (six sides that are squares), the regular octahedron (eight sides that are equilateral triangles), the regular dodecahedron ( ...

What are conic sections and why are they called so? ›

The conic sections are called the conic section because the cone is been cut at different angles or the curves are formed by the intersection of the right circular cone with the plane surface. The different types of conics are: Parabola. Hyperbola.

Top Articles
Best Cookware Buying Guide - Consumer Reports
6 diet tips for healing from autoimmune disease
Kmart near me - Perth, WA
Forozdz
Jazmen Jafar Linkedin
Form V/Legends
Regal Amc Near Me
Jeremy Corbell Twitter
Rek Funerals
Poplar | Genus, Description, Major Species, & Facts
More Apt To Complain Crossword
Publix 147 Coral Way
Why Is Stemtox So Expensive
Sams Early Hours
Hartland Liquidation Oconomowoc
Mail.zsthost Change Password
Missouri Highway Patrol Crash
Craigslist Pinellas County Rentals
Energy Healing Conference Utah
Aaa Saugus Ma Appointment
Menards Eau Claire Weekly Ad
The Blind Showtimes Near Amc Merchants Crossing 16
Pokemon Unbound Shiny Stone Location
12 Facts About John J. McCloy: The 20th Century’s Most Powerful American?
Xxn Abbreviation List 2017 Pdf
Gen 50 Kjv
Ncal Kaiser Online Pay
Rainfall Map Oklahoma
Pay Stub Portal
Shauna's Art Studio Laurel Mississippi
Learn4Good Job Posting
Netherforged Lavaproof Boots
Kvoa Tv Schedule
Omnistorm Necro Diablo 4
Ewwwww Gif
Chuze Fitness La Verne Reviews
Captain Billy's Whiz Bang, Vol 1, No. 11, August, 1920
America's Magazine of Wit, Humor and Filosophy
Trap Candy Strain Leafly
Tryst Houston Tx
Walmart Car Service Near Me
Craigslist Food And Beverage Jobs Chicago
Tfn Powerschool
705 Us 74 Bus Rockingham Nc
Skyward Cahokia
VerTRIO Comfort MHR 1800 - 3 Standen Elektrische Kachel - Hoog Capaciteit Carbon... | bol
Petfinder Quiz
Every Type of Sentinel in the Marvel Universe
French Linen krijtverf van Annie Sloan
Www Ventusky
ESPN's New Standalone Streaming Service Will Be Available Through Disney+ In 2025
Used Curio Cabinets For Sale Near Me
Qvc Com Blogs
Latest Posts
Article information

Author: Carmelo Roob

Last Updated:

Views: 6478

Rating: 4.4 / 5 (65 voted)

Reviews: 88% of readers found this page helpful

Author information

Name: Carmelo Roob

Birthday: 1995-01-09

Address: Apt. 915 481 Sipes Cliff, New Gonzalobury, CO 80176

Phone: +6773780339780

Job: Sales Executive

Hobby: Gaming, Jogging, Rugby, Video gaming, Handball, Ice skating, Web surfing

Introduction: My name is Carmelo Roob, I am a modern, handsome, delightful, comfortable, attractive, vast, good person who loves writing and wants to share my knowledge and understanding with you.